基于案例的RCM分析系统研究

提出了利用基于案例的推理（CBR）技术开发以可靠性为中心的维修（RCM）分析系统的设想。提出了基于案例的RCM分析系统的结构,讨论了在开发系统原型机的过程中所采用的RCM案例的表示和组织,同类案例优先的检索策略,利用规则组合及调整案例等主要技术。     

飞船再入舱三维化学非平衡流数值模拟

对飞船再入舱高超声速化学非平衡三维流场进行数值模拟。控制方程为含化学反应源项的全Ｎａｖｉｅｒ－ Ｓｔｏｋｅｓ 方程组, 化学模型为高温空气的七组元模型, 其组元成分为Ｎ２ 、Ｏ２、ＮＯ、Ｎ、Ｏ、ＮＯ＋ 、ｅ－ 。差分格式采用张涵信院士提出的ＮＮＤ激波捕捉格式并用全耦合方法处理流动方程及化学反应方程, 对化学反应源项采用全隐式处理, 运用时间预处理技术以加快收敛。同时, 也对完全气体模型进行计算, 以分析真实气体效应。与实验数据对比, 说明本文结果是可信的。     

基于尺度空间理论的多门限化技术

本文基于尺度空间理论提出了两种多门限化方法：第一种新方法先由精到粗求直方图在不同尺度下的表征,再由粗到精校正定位,最后由生命期长短来确定门限;第二种方法首先在一粗尺度上找特征结构,再由粗到精“聚焦”到最精尺度上获取门限。两方法克服了以往一般门限法的若干缺陷,不仅定位准确,而且普适性强。实验证明新方法是令人满意的。     

与装备维修组织设计相关的几个问题

论述了建立装备维修组织过程中的主要活动及它们之间的关系。分析了国内外目前在该领域的研究状况。重点讨论了装备维修组织设计中任务环境、资源组成、资源分布、管理结构、维修专业组结构及资源动态决策等六个问题。     

舵机弯矩电动加载测试系统的设计

针对舵机测试需求,设计了一种弯矩电动加载测试系统.系统以直流电机为执行元件能够实现几百到几万牛力加载,介绍了系统的工作原理和机械结构,分析计算了弯矩加载对其他力矩加载的干扰和系统影响,从测试技术要求上论证了方案的可行性.最后进行了理论分析和研究,建立了加载系统的数学模型,基于PID控制算法,进行了计算机仿真.仿真结果表明,能够满足系统预定的性能指标要求.     

Constrained minimax optimization of continuous search efforts for the detection of a stationary target

Analytical resolution of search theory problems, as formalized by B.O. Koopman, may be applied with some model extension to various resource management issues. However, a fundamental prerequisite is the knowledge of the prior target density. Though this assumption has the definite advantage of simplicity, its drawback is clearly that target reactivity is not taken into account. As a preliminary step towards reactive target study stands the problem of resource planning under a min–max game context. This paper is related to Nakai's work about the game planning of resources for the detection of a stationary target. However, this initial problem is extended by adding new and more general constraints, allowing a more realistic modeling of the target and searcher behaviors. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

Production to order and off‐line inspection when the production process is partially observable

This study combines inspection and lot‐sizing decisions. The issue is whether to INSPECT another unit or PRODUCE a new lot. A unit produced is either conforming or defective. Demand need to be satisfied in full, by conforming units only. The production process may switch from a “good” state to a “bad” state, at constant rate. The proportion of conforming units in the good state is higher than in the bad state. The true state is unobservable and can only be inferred from the quality of units inspected. We thus update, after each inspection, the probability that the unit, next candidate for inspection, was produced while the production process was in the good state. That “good‐state‐probability” is the basis for our decision to INSPECT or PRODUCE. We prove that the optimal policy has a simple form: INSPECT only if the good‐state‐probability exceeds a control limit. We provide a methodology to calculate the optimal lot size and the expected costs associated with INSPECT and PRODUCE. Surprisingly, we find that the control limit, as a function of the demand (and other problem parameters) is not necessarily monotone. Also, counter to intuition, it is possible that the optimal action is PRODUCE, after revealing a conforming unit. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

联合二代Bandelet和Wavelet对图像进行分层压缩

一幅图像可以分解为匀质结构图和几何纹理图两个分量.基于这种思想,提出了一种使用二代Bandelet和小波对图像进行分层压缩的有效算法.首先,使用全变分方法把原始图像f分解为u和v两部分,其中u代表f中的结构分量,v代表纹理分量;对u进行小波变换,对v进行二代Bandelet变换.采用了自顶向下的四叉树分解算法,优化了二代Bandelet的四叉树建立过程.实验结果表明,该压缩方法的重建图像在视觉效果和客观SSIM值两方面均优于JPEG2000和Bandelets.     

自行火炮自动瞄准精度数据分析

通过自动瞄准精度的定义和测试方法简介,针对某自行火炮火控系统在自动瞄准精度测试中出现测量数据误差较大的现象,分析数据误差的原因,计算各种因素造成误差的大小,得出对自动瞄准精度影响最大的是车体姿态倾斜传感器误差、炮耳轴倾斜传感器的误差和炮耳轴与炮身轴线的不垂直度.鉴于此,自行火炮提出用火控软件的方法和工艺控制,减少自动瞄准误差和射击诸元装定误差,提高射击精度.     

台湾同胞投身祖国大陆抗战述略

日本1895年掠夺去台湾、把台湾变为其殖民地后,其侵略中国的野心不断膨胀、侵略中国的步伐逐步升级.1931年日本侵占中国东北,1937年日本又对中国大陆发动全面侵略.